Freight deliveries require a delivery time be scheduled and someone must be present at the time of delivery to inspect and sign for the merchandise. A representative from the freight carrier will call the phone number entered at checkout to schedule the delivery.
For freight deliveries, you have the option of adding a liftgate to your delivery. A liftgate is the device that lowers a product from the truck to ground level.
CPO recommends adding liftgate service for freight deliveries exceeding 100 lbs if you do not have a loading dock or fork lift at the delivery address. Additional charges may apply. The liftgate option will be presented during the checkout process.
Please note that liftgate service only ensures the product is removed from the truck. We recommend you have the additional help of two to four people to move the product to its desired location because drivers are not required to assist.
Requesting liftgate service after ordering may result in additional charges and delays.
|Carriage Travel:||35 in.|
|Compound Slide Travel:||2-11/16 in.|
|Cross Slide Travel:||6-5/16 in.|
|Distance Between Centers:||40 in.|
|Follow Rest Capacity:||2-3/4 in.|
|Length of Gap:||8 in.|
|Maximum Tool Size:||5/8 in. x 5/8 in.|
|Motor Type:||Single Phase|
|Number of Inch Threads:||40|
|Number of Metric Threads:||27|
|Number of Spindle Speeds:||12|
|Range of Cross Feeds:||.0012 - .0345|
|Range of Inch Threads (TPI):||4 - 112|
|Range of Longitudinal Feeds (IPR):||.0036 - .0325|
|Range of Metric Threads:||0.2 - 6|
|Range of Spindle Speeds:||60 - 1240 RPM|
|Spindle Bore:||1-3/8 in.|
|Spindle Taper with Sleeve:||MT-5 (MT-3)|
|Steady Rest Capacity:||2-5/8 in.|
|Swing Over Bed:||13 in.|
|Swing Over Cross Slide:||7-25/32 in.|
|Swing Through Gap:||18-3/4 in.|
|Tailstock Spindle Travel:||3-3/4 in.|
|Taper in Tailstock Spindle:||MT-3|
|Width of Bed:||7-3/8 in.|
Do you have questions about this product?
get answers from real customers and in-house experts with AnswerBox.
Q:What is the floor space amount required for this lathe?
A:The dimentions of the lathe are: Height: 45 Inches, Width: 32 Inches and Length: 71 Inches.
Q:Where is the model BDB-1340A Jet lathe made ?
A:The Jet BDB-1340A Lathe is assembled in the United States.
A:This item is rated in horsepower and not amperage. Motor is rated as 2 horsepower 230 volt.