|Bed Width:||10-1/2 in.|
|Carriage Travel:||37-1/2 in.|
|Cross Slide Travel:||6-3/8 in.|
|Distance Between Centers:||40 in.|
|Drive Type:||Geared Head|
|Follow Rest Capacity:||2-3/4 in.|
|Length of Gap:||9-3/8 in.|
|Max. Compound Slide Travel:||3-1/2 in.|
|Max. Tailstock Spindle Travel:||4-3/4 in.|
|No. of Cross Feed Rates:||40|
|No. of Inch Threads:||40|
|No. of Longitudinal Feed Rates:||40|
|No. of Metric Threads:||22|
|Range of Cross Feeds (IPR):||0.0003 in. - 0.0103 in.|
|Range of Inch Threads (TPI):||4 - 112|
|Range of Longitudinal Feeds (IPR):||0.0012 in. - 0.0294 in.|
|Range of Metric Threads:||0.45mm - 7.5mm|
|Spindle Bore:||1-1/2 in.|
|Spindle Mount Taper:||MT-5|
|Spindle Speed Range (RPM):||40 - 1,800|
|Spindle Speed Settings:||12|
|Steady Rest Capacity:||3-3/4 in.|
|Swing Over Bed:||14 in.|
|Swing Over Cross Slide:||8-1/2 in.|
|Swing Through Gap:||20 in.|
|Tailstock Spindle Taper:||MT-3|
|Tool Size:||5/8 in. x 5/8 in.|
Do you have questions about this product?
Get answers from real customers and in-house experts with AnswerBox.
A:In reviewing this listing, it appears that the description is incorrect. The correct description is as follows:
A:No, they have the description wrong.
Q:Is there an automatic feed?
A:No, it does not included an automatic feed.
Q:how can I get the drive belts, set for my Jet BD-290W
A:Please contact the manufacturer direct at 1-800-274-6848 for assistance with parts.
Q:One of the reviews says it is underpowered. It shows a 3hp motor. why would this be considered underpowered?
A:It also states that it's a 3 phase not 220v or 120v. Why would anyone claim it lacks power?
A:That is a great question. 3HP is more than enough power for a lathe this size. In fact, some of the larger 13x40 lathes only have 2HP.
Q:Can this lathe be ordered with a single phase 2 - 5 horsepower motor?
A:The only single phase lathe that Jet makes at this size travel is the 321376. Which is 3/4HP and single phase
Q:Is this lathe set up for 115v or 230v? The manual and Jet's site lists it as 115v. The product specs here list 230v.
A:This lathe is prewired at 230v.
Q:What is the length height and weight ?
A:The Overall Dimensions .. 40”L x 21”W x 20”H, and the weight is 254 lbs.
A:The JET BD-920W Lathe with S-920N Stand is 45" x 38" x 20" and weighs 325 pounds.