Freight deliveries require a delivery time be scheduled and someone must be present at the time of delivery to inspect and sign for the merchandise. A representative from the freight carrier will call the phone number entered at checkout to schedule the delivery.
For freight deliveries, you have the option of adding a liftgate to your delivery. A liftgate is the device that lowers a product from the truck to ground level.
CPO recommends adding liftgate service for freight deliveries exceeding 100 lbs if you do not have a loading dock or fork lift at the delivery address. Additional charges may apply. The liftgate option will be presented during the checkout process.
Please note that liftgate service only ensures the product is removed from the truck. We recommend you have the additional help of two to four people to move the product to its desired location because drivers are not required to assist.
Requesting liftgate service after ordering may result in additional charges and delays.
|End Mill Capacity:||1/2-in|
|Face Mill Capacity:||2-1/2-in|
|Maximum Distance Spindle to Table:||15-in|
|Maximum Table Travel:||14-in|
|Motor:||1 HP, 1 Ph, 115/230V|
|Number of Spindle Speeds:||12|
|Quill Diameter:||2-1/2 in.|
|Range of Spindle Speeds:||110 - 2580 RPM|
|Spindle Travel:||3-1/2 in.|
|T-Slot Centers:||1-13/16 in.|
|Working Surface of Table:||7-1/2 in. x 23 in.|
Reviewed by 3 customers
Displaying reviews 1-3
Pros: I am setting up some light machining equip for a startup company, and this fits in.
Easy to set up, good price.Uses standard R* collets, includes angle vise.
Grease was easy to get off.
Cons: Angle vice is a bit crude and the chuck is not perfect. good place to start though.
missing the lifting hoop; took a while to rig a sling to lift out of my truck. Also missing the screws to the X & Y handles. Otherwise I'm satisfied.
For the money this machine is very good if extreme accuracy in machining is not required. The head on my machine was not perpendicular to the bed. I placed an indicator in the collet, and swung the indicator on the table, and got an error of about .004" on the y axis. I called the Jet help line but the person did not seem to know what to do. The only solution I can see is to place shims between the machine base and the column base where the front 2 bolts are. The chuck that comes with the machine is an economy unit and has about .003" runout. The flycutter that I ordered with the machine would not go into the spindle, nor would some of the other collets due to the fact that the pin inside the spindle which keeps the collet from rotating is sticking out too far. So I put the new machine to work and machined a deeper slot in the fry cutter, and then it fit in the spindle with no problem. I bought a 5" Enco precision milling machine vice with swivel base for [$] which fits this machine nicely.
Do you have questions about this product?
get answers from real customers and in-house experts with AnswerBox.
Q:What accessories would I need to purchase with this Mill to make it functional? Does it come with a vice, hold downs, cutter bits ? What else do I need to buy?
A:This item includes a 2-1/2" angle vise. There are not hold downs, or cutter bits included. You can also purchase the CS-18 stand.