Freight deliveries require a delivery time be scheduled and someone must be present at the time of delivery to inspect and sign for the merchandise. A representative from the freight carrier will call the phone number entered at checkout to schedule the delivery.
For freight deliveries, you have the option of adding a liftgate to your delivery. A liftgate is the device that lowers a product from the truck to ground level.
CPO recommends adding liftgate service for freight deliveries exceeding 100 lbs if you do not have a loading dock or fork lift at the delivery address. Additional charges may apply. The liftgate option will be presented during the checkout process.
Please note that liftgate service only ensures the product is removed from the truck. We recommend you have the additional help of two to four people to move the product to its desired location because drivers are not required to assist.
Requesting liftgate service after ordering may result in additional charges and delays.
|Belt Length:||48 in.|
|Belt Operating Speed (SFPM):||2,850|
|Belt Table Dimensions:||7-3/8 in. x 14-3/4 in.|
|Belt Table Tilt (Down):||45 Degrees|
|Belt Table Tilt (Up):||20 Degrees|
|Belt Width:||6 in.|
|Disc Diameter:||12 in.|
|Disc Operating Speed (RPM):||1,960|
|Disc Table Dimensions:||12 in. x 16-3/8 in.|
|Disc Table Tilt (Down):||45 Degrees|
|Disc Table Tilt (Up):||20 Degrees|
|Dust Port Size:||4 in.|
|Table Slots:||3/8 in., 3/4 in.|
|Table Type:||Cast Iron|
Reviewed by 1 customer
Displaying review 1
Comments about J-4202A, Industrial Belt and Disc Mach 3Ph:
I am a custom gun builder and I use my tools on a daily basis and this is one of the best built tools you could ever ask for. This sander truly has nothing wrong with it and has no weaknesses that I can find, the applications with this machine are endless. I specifically got this for metal work but I will have to also use it for wood because one of the wood sanding tools I purchased from here is absolutely POOR! This tool could not be more opposite with its stout frame and engineering as a whole. If you use your tools on a regular basis I would get this for sure!