JET 708352 JWL-1236, 12-in x 34-1/2-in 3/4 HP Woodworking Lathe
Learn more about freight deliveries.
People who purchased this item also viewed...
- Heavy-duty cast-iron lathe bed adds stability while limiting vibration
- Headstock pivots 90 Degrees and locks to facilitate outboard turning
- Reeves drive pulley system allows quick variable speed changes from 550 to 3,000 RPM
- The bed is specially designed to allow easy positioning of the outboard turning tool rest
- Heavy-duty cast-iron headstock and tailstock provide rigidity and strength for long tool life
- Hollow tailstock lets you perform long hole boring operations
- Variable-speed spindle includes six pre-positioned selections with positive detents to quickly set speed to the most common requirements
- Locking control levers quickly and securely position the tool rest
- Heavy-duty 3/4 HP single phase induction motor with industrial controls provides smooth, consistent power during use
- Heavy-duty steel open stand provides support and stability to the tool for better results
- 12-in x 34-1/2-in 3/4 HP Woodworking Lathe - 708352
- 12-in Tool Rest
- 6-in Face Plate
- Spur Center
- Live Center
- Face Shield
- Tooling Knockout
| Motor: | 3/4 HP, 1Ph, 115V |
| Speeds: | Six 550 - 3,000 RPM |
| Headstock Taper: | MT-2 |
| Swing Over Bed: | 12-in |
| Distance Between Centers: | 34-1/2-in |
| Spindle Nose: | 1-in x 8 TPI |
| Hole Through Tailstock: | 3/8-in |
| Swing Over Tool Rest Base: | 8-3/4-in |
| Ram Travel: | 2-1/4-in |
| Tailstock Taper: | MT-2 |
| Hole Through Spindle: | 3/8-in |
| Center Line to Floor: | 41-in |
| Outboard Turning: | Up to 16-1/2-in |
| Overall Dimensions: | 60-in x 17-in x 44-in |
| Weight: | 183 lbs. |
JET RED ASSURANCE Program
Do you know about the JET RED ASSURANCE Program? Well, the JET RED ASSURANCE Program was designed to make sure you do! JET has the best and most dependable service in the Industry and they want to make sure you know about it. In addition, to their standard warranty JET offers the Industry's most dependable service and support guarantee. Click here to learn more about what JET RED ASSURANCE can do for you!
5-Year
WARRANTY AND SERVICE
WMH Tool Group, Inc., warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these WMH Tool Group Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your JET® tools. For the name of an Authorized Service Center in your area, call 1-800-274-6848.
MORE INFORMATION
This warranty covers any defects in workmanship or materials subject to the exceptions stated below. Cutting tools, abrasives and other consumables are excluded from warranty coverage.
WARRANTY
This JET product carries a limited five-year warranty.
WHAT IS COVERED
This warranty covers any defects in workmanship or materials subject to the exceptions stated below. Cutting tools, abrasives and other consumables are excluded from warranty coverage.
WHO IS COVERED
This warranty covers only the initial purchaser of the product.
WHAT IS THE PERIOD OF COVERAGE
The general JET warranty lasts for the time period specified in the product literature of each product.
WHAT IS NOT COVERED
Five Year Warranties do not cover woodworking (WW) products used for commercial, industrial or educational purposes. Woodworking products with Five Year Warranties that are used for commercial, industrial or education purposes revert to a One Year Warranty. This warranty does not cover defects due directly or indirectly to misuse, abuse, negligence or accidents, normal wear-and-tear, improper repair or alterations, or lack of maintenance.
HOW TO GET SERVICE
The product or part must be returned for examination, postage prepaid, to a location designated by us. For the name of the location nearest you, please call 1-800-274-6848.
You must provide proof of initial purchase date and an explanation of the complaint must accompany the merchandise. If our inspection discloses a defect, we will repair or replace the product, or refund the purchase price, at our option. We will return the repaired product or replacement at our expense unless it is determined by us that there is no defect, or that the defect resulted from causes not within the scope of our warranty in which case we will, at your direction, dispose of or return the product. In the event you choose to have the product returned, you will be responsible for the handling and shipping costs of the return.
HOW STATE LAW APPLIES
This warranty gives you specific legal rights; you may also have other rights which vary from state to state.
LIMITATIONS ON THIS WARRANTY
WMH TOOL GROUP LIMITS ALL IMPLIED WARRANTIES TO THE PERIOD OF THE LIMITED WARRANTY FOR EACH PRODUCT. EXCEPT AS STATED HEREIN, ANY IMPLIED WARRANTIES OR MERCHANTABILITY AND FITNESS ARE EXCLUDED. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG THE IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. WMH TOOL GROUP SHALL IN NO EVENT BE LIABLE FOR DEATH, INJURIES TO PERSONS OR PROPERTY, OR FOR INCIDENTAL, CONTINGENT, SPECIAL, OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OF OUR PRODUCTS. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.
WMH Tool Group sells through distributors only. The specifications in WMH catalogs are given as general information and are not binding. Members of WMH Tool Group reserve the right to effect at any time, without prior notice, those alterations to parts, fittings, and accessory equipment which they may deem necessary for any reason whatsoever.
Product Reviews
Reviewed by 1 customer
Displaying review 1
Pros
- Easy To Use
Cons
Best Uses
- In The Workshop
Comments about JET JWL-1236, 12-in x 34-1/2-in 3/4 HP Woodworking Lathe:
I use the jwl 1236 lathe for turning table pedestals, bowls, vases, spindles, you name something round and I've probly turned it on this lathe. Its a great lathe for the price. The best feature about this lathe is the swiveling headstock. I tend not to use the detents, but rather swivel it 45* and lock it in, this works awesome for turning most bowls.
CONS: There are 2 things I dislike about this lathe. The tool rest extension arm doesn't seem sturdy enough to use on large bowls with the headstock turned out a 90*. Its just not stable enough.
PROS: Its got enough power to spin a 30" oak pedestal thats got an 11" diamater. Thats pretty good I'd say.
CON 2: I would like a heavier base. The bed is indeed cast and heavy, but the base either needs to be bolted to my floor, or heavier. When I turn large things that are not cylindrical I've got to be very careful not to spin it to fast.
PRO 2: Owned the lathe for 8 years and have never had any maintence issues. Maybe I'll need a belt soon, I would suggest upgrading to a link style belt instead of using the v belt.
CON 3: The motor overheated on me once. It smelled really bad, but I hit the reset and it started right back up and has been going ever since.
I have put a lot of hours of use into this lathe, I can't see myself needing to upgrade to anything else. Its a great beginner lathe, as well as intermediate. If I ever "turn" professional, I may want to consider something a little more rigid and robust. But, this suits my needs for now.
Displaying review 1
