|Arbor Size:||5/8 in.|
|Blade Diameter:||10 in.|
|Blade Tilt Range:||0 - 45 Degrees|
|Dado Blade Diameter (Max.):||8 in.|
|Dado Blade Width (Max.):||13/16 in.|
|Depth of Cut (45 Degrees):||2-1/8 in.|
|Depth of Cut (90 Degrees):||3-1/8 in.|
|Extension Type:||Laminate Table|
|Max. Rip Capacity (Left):||12 in.|
|Max. Rip Capacity (Right):||52 in.|
|No-Load Speed (RPM):||4000|
|Table Clearance (Front of Blade):||10 in.|
|Table Depth:||27 in.|
|Table Height:||34-3/4 in.|
|Table Type:||Cast Iron|
|Table Width:||20 in.|
|Table Width (w/ Extension):||82 in.|
|Table Width (w/ Wings):||44 in.|
|Wing Type:||Cast Iron|
Do you have questions about this product?
Get answers from real customers and in-house experts with AnswerBox.
Q:I recently bought and it seems to make a kinda klunky sound when you stop the saw and it's coming to a stop. Not sure if this is normal or??
A:My saw does not make that noise, my only suggestion to you is call JET tech support.
A:Please contact Jet directly for technical support at 800-274-6848.
Q:what is the height from table top to base bottom without legs. i am in a wheel chair and need to put on a really low table. thank you john leavitt
Q:With the addition of the ringside extension table how long is this saw set up?
A:Table dimensions with wings 44”L x 27”W .
A:The table size with the extension is 27 inches by 44 inches.
Q:Does the riving knife on the JPS-10TS retract for dado or not all the way through cuts?
A:Non-Through Cut: A sawing operation that requires the removal of the blade guard and standard riving knife, resulting in a cut that does not protrude through the top of the workpiece (includes Dado and rabbet cuts).
Q:what is the difference between the Jet 708495K and the Powermatic 1791230K
A:They are basically the same item. Here are the specifications on each:
A:The JET bench includes a 10-in. blade; the Powermatic does not come with any blades. The JET bench also has a larger work table, extended by collapsible table legs, and uses a powder-coated paint that ensures a long-lasting finish.