JET JBTS-10LS-2, 10" Left Tilt Bench Top Table Saw w/ Leg Stand and 55" Work Surface
Model No. 708315LSB- CPO Price:
- $399.99
Need help choosing a table saw?
Click here to learn about the important considerations.
For a fast set-up and a quick cut, choose the JET® Bench Top Table Saw. Our exclusive Smooth Speed™ Belt drive transmission that eliminates vibration to the blade, our exclusive Precision-Rule™ measurement system, and dual extension wings make this table saw is a must-have for a growing shop or on the go.
Features: JET 10" Left Tilt Bench Top Table Saw w/ Leg Stand and 55" Work Surface
- Exclusive design constructed with steel corner posts for the toughest applications
- Smooth Speed™ belt drive transmission with poly-V belt eliminates vibrations to the blade and extends life of motor, provides quieter operation and better transfer of power
- Precision-Rule™ measurement system provides quick identification of cutting capacity up to 24-1/2" (when wing is fully extended)
- Rapid wing extension expands work surface up to 55" for additional support
- Precision-machined miter slots provides direct control of miter gauge resulting in better cuts
- Dual function hand wheel raises and bevels blade for quick and accurate setup
- Rear out feed support provides out feed support and also converts to a left side extension
- Contoured side handles allows easy lifting and mobility of the saw
- Left tilting for more controlled bevel cutting
- On-board storage for conveniently storing power cord, rip fence, miter gauge, saw blade, and wrench
- Dust collection adaptor port connections either a 2-1/2" shop vacuum or a 4" dust collection system
- Leg stand with steel storage shelf converts table saw from bench top to stationary
The JET 708315LSB Includes:
- 10" Left Tilt Bench Top Table Saw w/ Leg Stand and 55" Work Surface - 708315LSB
- Leg Stand
| Motor | 115V; 1Ph |
|---|---|
| Blade Diameter | 10" |
| Arbor Diameter | 5/8" |
| Arbor Speed | 5,000 RPM |
| Maximum Depth of Cut | 3" |
| Maximum Depth Of Cut (at 45°) | 2-1/2" @ 45° |
| Maximum Diameter Of Dado | 6" |
| Maximum Width of Dado | 1/2" |
| Table Size (w/ Extension) | 55" x 18" (L x W) |
| Table Size (w/o Extension) | 28" x 18" (L x W) |
| Rapid Wing Extension | 2 |
| Leg Stand W/ Steel Storage | Yes |
| Overall Dimensions | 17" x 25" x 36" (H x W x L) |
| Net Weight | 72 lbs. |
5-Year
WARRANTY AND SERVICE MORE INFORMATION WARRANTY This JET product carries a limited five-year warranty. WHAT IS COVERED WHO IS COVERED WHAT IS THE PERIOD OF COVERAGE WHAT IS NOT COVERED HOW TO GET SERVICE HOW STATE LAW APPLIES LIMITATIONS ON THIS WARRANTY WMH Tool Group sells through distributors only. The specifications in WMH catalogs are given as general information and are not binding. Members of
WMH Tool Group reserve the right to effect at any time, without prior notice, those alterations to parts, fittings, and accessory equipment which they may
deem necessary for any reason whatsoever.
WMH Tool Group, Inc., warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located
throughout the United States can give you quick service. In most cases, any of these WMH Tool Group Authorized Service Centers can authorize
warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your JET® tools. For the name of an
Authorized Service Center in your area, call 1-800-274-6848.
This warranty covers any defects in workmanship or materials subject to the exceptions stated below. Cutting tools, abrasives and other consumables
are excluded from warranty coverage.
This warranty covers any defects in workmanship or materials subject to the exceptions stated below. Cutting tools, abrasives and other consumables
are excluded from warranty coverage.
This warranty covers only the initial purchaser of the product.
The general JET warranty lasts for the time period specified in the product literature of each product.
Five Year Warranties do not cover woodworking (WW) products used for commercial, industrial or educational purposes. Woodworking products with Five Year Warranties that are used for commercial, industrial or education purposes revert to a One Year Warranty. This warranty does not cover defects due directly or indirectly to misuse, abuse, negligence or accidents, normal wear-and-tear, improper repair or alterations, or lack of maintenance.
The product or part must be returned for examination, postage prepaid, to a location designated by us. For the name of the location nearest you,
please call 1-800-274-6848.
You must provide proof of initial purchase date and an explanation of the complaint must accompany the merchandise. If our inspection discloses
a defect, we will repair or replace the product, or refund the purchase price, at our option.
We will return the repaired product or replacement at our expense unless it is determined by us that there is no defect, or that the defect resulted
from causes not within the scope of our warranty in which case we will, at your direction, dispose of or return the product. In the event you choose to
have the product returned, you will be responsible for the handling and shipping costs of the return.
This warranty gives you specific legal rights; you may also have other rights which vary from state to state.
WMH TOOL GROUP LIMITS ALL IMPLIED WARRANTIES TO THE PERIOD OF THE LIMITED WARRANTY FOR EACH PRODUCT. EXCEPT AS STATED
HEREIN, ANY IMPLIED WARRANTIES OR MERCHANTABILITY AND FITNESS ARE EXCLUDED. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW
LONG THE IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU.
WMH TOOL GROUP SHALL IN NO EVENT BE LIABLE FOR DEATH, INJURIES TO PERSONS OR PROPERTY, OR FOR INCIDENTAL, CONTINGENT,
SPECIAL, OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OF OUR PRODUCTS. SOME STATES DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.
